RC Home | How To | GPV-1 Steering Upgrade
RC How To:
GPV-1 Complete Steering Upgrade - 2
(Removal of Stock Parts)
This being my first upgrade on the GPV-1 and it being a RTR, I was unfamiliar with how it was put together, but Venom included a great kit manual with the bike which made what turned out to be a simple upgrade even easier.
Remove the front wheel with one screw. Remove the fender with 2 small screws on each side.
Loosen the small screws on the triple clamps with a 1.5mm hex and slide the plastic forks downward and out.
Page 2 - Removing Front Wheel and Forks
Page 3 - Preparing Alloy Forks
Page 4 - Triple Clamps, Bearings, and Steering Stem
Page 5 - Servo Upgrade
Terms of Use 2009-2019
